National Instruments PXI PXITM -1000 - Manual (Page 12)

Chapter 1 Getting Started
PXI-1000 User Manual 1-2 © National Instruments Corporation
If you are missing any of the above items or if you have the incorrect power
cord, contact National Instruments.
Optional Equipment
An optional rack-mount kit is available from National Instruments. You
can use this kit to install the PXI-1000 mainframe into a standard 19 in.
(482 mm) instrument cabinet. Contact National Instruments to order the
PXI-1000 rack-mount kit.
Key Features
The PXI-1000 combines a high-performance 8-slot PXI backplane with a
high-output power supply and a structural design that has been optimized
for maximum usability in a wide range of applications. The mainframe’s
modular design ensures the highest level of maintainability resulting in a
very low mean time to repair (MTTR). The PXI-1000 fully complies with
the PXI Specification, Revision 1.0, offering advanced timing and
synchronization features.
The key features of the PXI-1000 include:
• PXI and CompactPCI (PICMG 2.0 R 2.1) module compatibility
• Compact 3U-sized, 8-slot chassis
• 300 W of usable power
• Universal AC input: auto-voltage and auto-frequency ranging
• Over-current protection via push-reset circuit breaker (no loose fuses
to replace)
• Removable modular power supply with MTBF of 90,000 hours
• Remote power status and inhibit via a rear panel connector
• On/Off (Standby) switch located on the front panel for easy access
Universal Euro 240 V CEE (7), II, IV, VII IEC83
North America 240 V ANSI C73.20/NEMA 5-15-P/IEC83
United Kingdom 240 V BS 1363/IEC83
Table 1-1. Power Cables (Continued)
Power Cable Reference Standards