Nokia 2855 - Manual (Page 38)

Copyright © 2006 Nokia. All rights reserved.
M e s s a g i n g
28
■ Voice messages
If you subscribe to voice mail, your
wireless provider will furnish you with
a voice mailbox number. You need to
save this number to your phone to use
voice mail. When you receive a voice
message, your phone will beep, display
a message, or both. If you receive more
than one message, your phone shows
the number of messages received.
Save voice mailbox number
Your wireless provider may have
already saved your voice mailbox
number to your phone. If so, the
number will appear in the display in
step 2. Select OK to leave the number
unchanged.
1. In standby mode, select Menu >
Messaging > Voice messages >
Voice mailbox number .
2. If the number is not displayed or
incorrect, enter your voice mailbox
area code and number.
3. Select OK .
Call and set up your
voice mail
After you save the voice mailbox, in
standby mode, press and hold 1. When
you connect to voice mail and the
prerecorded greeting begins, follow
the automated instructions to set up
your voice mail.
Listen to your voice mail
After you set up voice mail, you can
dial the number in one of four ways:
• Dial the number.
• Press and hold 1.
• Select Listen if there is a
notification on the display.
• In standby mode, select Menu >
Messaging > Voice messages >
Listen to voice messages .
When you connect and the
prerecorded greeting begins, follow
the automated instructions to listen to
your voice messages.
Automate voice mail
Voice mail services vary by service
provider. The following instructions are
examples of common operations.
Please check with your service provider
for specific instructions for using your
voice mail service.
Write down number and
process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Note that each voice mail service
may vary. Your steps may resemble
the following: