Nokia 2855 - Manual (Page 47)

Copyright © 2006 Nokia. All rights reserved.
C o n t a c t s
37
■ Modify contact
settings
In standby mode, select Menu >
Contacts > Settings and the setting
you wish to change:
Scrolling view —Select Normal name
list , Name and number , Large name list ,
or Name and image view.
Memory status —View the amount of
phone memory used as well as the
amount of phone memory available.
■ Set up caller groups
You can add contacts to caller groups
that you create and assign a unique
ringing tone or graphic to each group.
This enables you to identify callers
from the group by their unique ringing
tone or graphic.
Create a caller group
You can create a new caller group and
store a list of contacts in the group.
In standby mode, select Contacts >
Groups > Options > Add new group ;
enter the name of the new group, and
press OK .
Add a contact to a
caller group
1. In standby mode, scroll down to
display your list of contacts.
2. Highlight a contact, select Details .
3. Highlight a number, and select
Options > Add to group and the
existing caller group to which you
wish to add the number.
Modify a caller group
In standby mode, select Menu >
Contacts > Groups > Options > Group
details and one of the following
options:
Group name —Rename the group to
your preference.
Group ringing tone —Set the ringing
tone for the group.
Group image —Turn the graphic for the
caller group on or off.
Group members —Add or remove
members from the caller group.
■ Set up voice tags
Before using voice tags, note the
following:
• Voice tags are not language-
dependent. They are dependent on
the speaker's voice.
• You must say the name exactly as
you said it when you recorded it.