Nokia 2855 - Manual (Page 60)

Copyright © 2006 Nokia. All rights reserved.
S e t t i n g s
50
International prefix
If supported by your service provider,
you can store an international prefix
into your phone. When you enter + at
the beginning of a phone number, your
phone automatically inserts the
international prefix that you have
stored.
Store an international prefix
1. In standby mode, select Menu >
Settings > Call > International
prefix .
2. Enter the international prefix (for
example, 011), and select OK .
Use the international prefix
In standby mode, press the * key twice
to bring up the + symbol, and the
phone number you want to call, for
example, +33934546789.
The phone dials the international
prefix you have stored in your phone
and the phone number you have
entered. In the example, the phone
dials 011.33.9.3454.6789.
Data and fax calls
Receive data or fax calls
Data/fax calls .
If your wireless service provider or
network operator supports this feature,
you can set up the phone to send or
receive data or fax calls when a
terminal, such as a PDA or PC, is
connected. See “ Network services ”,
p. viii , for more information.
For better performance during data
calls, place the phone on a stationary
surface. Do not move the phone by
holding it in your hand during a data
call.
For more information on connectivity,
refer to the PC/PDA Connectivity
Guide. The PC/PDA Connectivity Guide
can be downloaded from the Nokia
website at www.nokia-asia.com.
1. In standby mode, select Menu >
Settings > Call > Data/fax calls >
Incoming data/fax call and view
the following options:
Normal —The phone receives
incoming calls as usual.
Data calls only —The phone receives
only data calls.
Fax calls only —The phone receives
only fax calls.
2. Select Data calls only or Fax calls
only .
3. When you are finished receiving
the fax or data call, repeat steps 1
and 2, and select Normal .
View data transfer
You can view the transmission speed
when sending or receiving data or fax
calls. In standby mode, select Menu >
Settings > Call > Data/fax calls > Data
rate display > Graphic or Off .