Nokia 2855 - Manual (Page 65)

Copyright © 2006 Nokia. All rights reserved.
S e t t i n g s
55
characters. The first time you try to
connect the devices, you must each
enter the same pass code. Once the
devices are paired, you will not need to
use the pass code again, so there is no
need to remember it.
Paired devices are placed in your
paired device list. You can view the list
even when Bluetooth connectivity is
not active or when the devices in the
list are not available for connection.
In standby mode, select Menu >
Settings > Connectivity > Bluetooth >
Paired devices > Options and one of
the following:
Assign short name —Give a nickname to
the selected device (visible to you
only).
Auto-conn. without confirmation —
Select No , if you want the phone to
connect to the selected device
automatically or Yes, if you want the
phone to ask for your permission first.
Delete pairing —Delete the pairing to
the selected device.
Pair new device —Search for active
devices with Bluetooth technology
within range, scroll to the desired
device, and select Pair to establish
pairing with that device. Do not accept
Bluetooth connectivity from sources
you do not trust.
Bluetooth connectivity
settings
You can define how your phone is
shown to other devices with Bluetooth
connectivity. In standby mode, select
Menu > Settings > Connectivity >
Bluetooth > Bluetooth settings and
one of the following:
My phone's visibility —Select Shown to
all to show the phone to all other
devices with Bluetooth connectivity or
Hidden to show the phone only to the
paired devices. Operating the phone in
hidden mode is a safer way to avoid
malicious software.
My phone's name —Change your phone
name that is seen by other users.
Set up a connection
1. In standby mode, select Menu >
Settings > Connectivity >
Bluetooth > On . The active
Bluetooth technology connection
is indicated by at the top of the
display.
2. Select Search for audio
enhancements to search for
compatible devices with Bluetooth
connectivity. The list of found
devices appears in the display.
3. Select the desired device. If
required, enter the Bluetooth
connectivity pass code of the
device to complete the pairing.