Appendix f accessory kit assembly procedure, Accessory kit assembly procedure, Compactflash to ide transfer kit assembly – National Instruments Touch Panel Computer TPC-2012 User Manual
Page 42
Advertising
© National Instruments Corporation
F-1
F
Accessory Kit Assembly
Procedure
This appendix explains how to connect to a CD-ROM via the
CompactFlash slot.
CompactFlash to IDE Transfer Kit Assembly
Follow these steps to connect to a CD-ROM via the CompactFlash slot:
1.
Connect the IDE cable to the adapter board.
2.
Insert the adapter board into the CompactFlash slot.
3.
Connect the CD-ROM to the IDE cable.
4.
Connect the external power line to the CD-ROM.
Advertising
This manual is related to the following products: