Nilfisk-Advance America GB 1133 - Manual (Page 17)

Category of application: “C“ and “K1“
Type B: Disposable container Art.no. 031 101
When the container has been torn away from the
machine, close it by the lid and fix the lid by the
clamp ring.
Type A: Dust bag system Art.no. 030 343
Leave the hose connected or close by shutter cap!
Having opened the system, carefully remove the
plastic bag which that is covering the container’s
edge. Close the bag’s opening. Now remove the
cornered back part of the bag’s flange carefully
from the inlet. While doing this, hold the fastening
ring placed on the inlet.
The plastic connection gets visible. It can be closed
tight by the binder.
Having assured that the dust cannot escape from the
dust bag, release the fastening ring from the inlet.
The dust bag can now be removed from the container
without any risk.
Put a new dust bag into the container. Its connector
must point at the inlet.
Now push the flange onto the inlet until fits tight.
The plastic bag has to fit well the bottom and walls of
the container. Tear the edge of the bag above the
edge of the container and smooth it down.