National Instruments IMAQ Vision for LabWindows TM /CVI - Manual (Page 50)

Chapter 4 Performing Particle Analysis
IMAQ Vision for LabWindows/CVI User Manual 4-8 ni.com
IMAQ_MT_MAX_FERET_DIAMETER_START_Y Y-coordinate of the start of the
line segment connecting the two
perimeter points that are the furthest
apart
IMAQ_MT_MAX_HORIZ_SEGMENT_LENGTH_LEFT X-coordinate of the leftmost pixel in
the longest row of contiguous pixels
in the particle
IMAQ_MT_MAX_HORIZ_SEGMENT_LENGTH_RIGHT X-coordinate of the rightmost pixel
in the longest row of contiguous
pixels in the particle
IMAQ_MT_MAX_HORIZ_SEGMENT_LENGTH_ROW Y-coordinate of all of the pixels in the
longest row of contiguous pixels in
the particle
IMAQ_MT_MOMENT_OF_INERTIA_XX Moment of inertia in the x direction
twice
IMAQ_MT_MOMENT_OF_INERTIA_XY Moment of inertia in the x and y
directions
IMAQ_MT_MOMENT_OF_INERTIA_YY Moment of inertia in the y direction
twice
IMAQ_MT_MOMENT_OF_INERTIA_XXX Moment of inertia in the x direction
three times
IMAQ_MT_MOMENT_OF_INERTIA_XXY Moment of inertia in the x direction
twice and the y direction once
IMAQ_MT_MOMENT_OF_INERTIA_XYY Moment of inertia in the x direction
once and the y direction twice
IMAQ_MT_MOMENT_OF_INERTIA_YYY Moment of inertia in the y direction
three times
IMAQ_MT_NORM_MOMENT_OF_INERTIA_XX Normalized moment of inertia in the
x direction twice
IMAQ_MT_NORM_MOMENT_OF_INERTIA_XY Normalized moment of inertia in the
x and y directions
IMAQ_MT_NORM_MOMENT_OF_INERTIA_YY Normalized moment of inertia in the
y direction twice
Table 4-1. Particle Measurements (Continued)
Measurement Description