NordicTrack NTL21905.2 - Manual (Page 11)

HOW TO CONNECT A 75 OHM CATV CABLE
1. Connect a 75 ohm
CATV cable to the 75
ohm terminal on the
treadmill frame near
uprights.
HOW TO CONNECT AN EXTERNAL SOURCE
USING A CATV CABLE
1. Connect one end of a 75 ohm CATV cable to the
video output jack on your external source.
2. Plug in the power cord of your external source. See
your external source’s user’s manual for proper
grounding instructions.
3. Connect the 75 ohm CATV cable to the 75 ohm ter-
minal on the treadmill frame near the uprights.
11
75 Ohm Terminal
75 Ohm CATV Cable
Before operating the television, you must connect a 75 ohm CATV cable or a VCR to the 75 ohm terminal
on the treadmill. Note: Use a CATV cable to connect to an external source such as a cable box, analog cable,
satellite TV box, or VCR. No CATV cable is included.