NordicTrack NTL21905.2 - Manual (Page 27)

Press the Power button again and save
channels into the television’s memory.
When the Power button is pressed, the television
will begin scanning all of the cable channels avail-
able in your area. When no cable signal is de-
tected on a channel, the channel will be skipped.
When a cable signal is detected, the channel will
be saved into memory and the next channel will
be selected. This process will continue until the
highest channel is reached. Do not remove the
key while the television is scanning channels.
Note: If you are viewing channels through an ex-
ternal source such as a cable box or a VCR, the
television will only save the channel used by the
external source.
When you are finished using the TV settings
mode, remove the key.
To exit the TV settings mode at any time (except
while the television is scanning channels), remove
the key from the console.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmill features a cushioning system that re-
duces the impact as you walk or run on the treadmill.
To increase the firmness of the walking platform, step
off the treadmill and slide the cushion adjusters toward
the front of the treadmill. To decrease the firmness,
slide the cushion adjusters toward the back of the
treadmill. Note: Make sure that both adjusters are
set at the same firmness level. The faster you run
on the treadmill, or the more you weigh, the firmer
the walking platform should be.
5
4
Cushion
Adjustor
Walking Platform
Increase
Decrease
Cushion
Adjustor
27