Numark Industries NUMARK DM1001X - Manual (Page 10)

DM1001X/DM1002X
SPECIFICATIONS...
Inputs:
Line: 10Kohm input impedance
1V rms sensitivity (for 1.22V output)
Mic: 10 Kohm input impedance unbalanced
2V rms sensitivity (for 1.22V output)
60mV rms max input
Phono: 47Kohm input impedance
1V rms sensitivity @ 1KHz (for 1.22V output)
Outputs:
Line: 7V rms max
Headphone: .5 watt into 47ohm
Distortion: less than 0.01%
Signal to Noise Ratio (vs. maximum output)
Line: Better than 89dB
Mic: Better than 72dB
Phono: Better than 80dB
Frequency Response:
Mic: 20Hz - 15 KHz +/-0.5dB
Line: 20Hz - 20 KHz +/-0.5dB
Phono: +/- 1dB except for controlled attenuation of -3dB
@ 20Hz to reduce rumble and feedback
Channel EQ:
Bass: +15/-30 dB @ 40 Hz
Middle: +15/-30 dB @ 1.36 kHz
Treble: +12/-25 dB @ 20 kHz
Talkover Attenuation:
-16dB
Channel KILL:
(DM1002X only)
Bass: -66 dB @ 50 Hz
Middle: -31 dB @ 1.2 kHz
Treble: -66 dB @ 15 kHz
Power Consumption:
5 watt typical, 7.8watt with full headphone output
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries 10 http://www.numark.com