Safety instructions – Numark Industries NUMARK DM1001X User Manual
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE ANY COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
The lightning flash with arrowhead symbol within the
equilateral triangle is intended to alert the user to the presence
of un-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within the equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying this appliance.
FOR USA & CANADIAN MODELS ONLY
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
1. Read Instructions - All the safety and operating
instructions should be read before this product is
connected and used.
2. Retain Instructions - The safety and operating
instructions should be kept for future reference.
3. Heed Warnings - All warnings on this product and in
these operating instructions should be followed.
4. Follow Instructions - All operating and other
instructions should be followed.
5. Water and Moisture - This product should be kept
away from direct contact with liquids.
6. H e a t - Avoid placing this product too close to any high
heat sources such as radiators.
7. Power Sources - This product should be
connected to a power supply only of the type
described in these operating instructions, or as
marked on the unit.
8. Power Cord Protection - Power supply
cords should be routed so that they are not
likely to be walked upon or pinched by items
placed on or against them. When removing the
cord from a power outlet be sure to remove it
by holding the plug attachment and not b y
pulling on the cord.
9. Object and Liquid Entry - Take care that
objects do not fall into and that liquids are not
spilled into the inside of the mixer.
10. Damage Requiring Service - This
product should be serviced only by qualified
personnel. If you have any questions about
service please contact Numark at the
number(s) shown on the back cover of this
11. Grounding or Polarization - Precautions
should be taken so that the grounding or
polarization means built into the mixer is not
12. Internal/External Voltage Selectors -
Internal or external voltage selector switches, if
any, should only be reset and re-equipped
with a proper plug for alternative voltage by a
qualified service technician. Do not attempt to
alter this yourself.
NOTE: This apparatus does not exceed the
Class A/Class B (whichever is applicable)
limits for radio noise emissions from digital
apparatus as set out in the radio interference
regulations of the Canadian Department of
WARNING: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture. Electrical equipment should NEVER
be kept or stored in damp environments.
Please record the serial number of your unit as shown on the back of the chassis as well as the name of
the dealer from whom you purchased the unit. Retain this information for your records. Please return the
warranty card enclosed to register your unit with us.
DATE OF PURCHASE:________________________
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries