Nortel Networks 3300 - Manual (Page 15)

Call Handling
To leave a Conference:
• Hang up.
Conference Split
To Split a Conference and speak privately with the original party:
1. Press .
2. Dial *41.
To return to the conference call:
• Press
.
Call Forward
Call Forward lets you redirect incoming calls to an alternate number. Always redirects all
incoming calls regardless of the state of your phone. B-Int redirects internal calls when
your phone is busy, and B-Ext redirects external calls when your phone is busy. NA-Int
redirects internal calls after several rings if you don't answer, and NA-Ext redirects
external calls after several rings if you don't answer.
Note: For information about "I Am Here?", see Call Forward - Remote on page 16
To program Call Forward:
1. Press + 17 (Superkey).
2. Press # (No) until "Call Forwarding?" appears.
3. Press * (Yes).
4. Press # (Next) until the desired type of Call Forward appears (see above).
5. Press * (Review).
6. If the number is already programmed, press * (Change).
7. Press * (Program).
8. Dial the destination number.
9. Press + 18 (Down Arrow)to save.
10. Press + 17 (Superkey).
To turn Call Forward on and off (once it has been programmed):
1. Press + 17 (Superkey).
2. Press # (No) until "Call Forwarding?" appears.
3. Press * (Yes).
4. Press # (Next) until the desired type of Call Forward appears.
15