Netac Tech T610 - Manual (Page 11)

Netac AirTrack T610 Wireless Broadband Router
6
Figure 2.5 "Select Network Component Type" dialog box
5. Select “Protocol”, click “Add”, Figure 2.6 shows the pop-up dialog box, select “Internet Protocol (TCP/IP)”,
click “OK”, then you can finish installing and go back to the interface as figure 2.4.
Figure 2.6 "Select Network Protocol" dialog box
6. Select “Internet Protocol (TCP/IP)” in the figure 2.4, click “Properties” button, Figure 2.7 shows the
"Internet Protocol (TCP/IP) Properties” dialog box.