Netac Tech T610 - Manual (Page 31)

Netac AirTrack T610 Wireless Broadband Router
26
Figure 4.6 Admin page
l Enter the LAN page. Enable DHCP server, set the start IP address to "192.168.1.10", the end IP
address to "192.168.1.100".
Figure 4.7 LAN configuration
l Configure WAN. According to the access mode, there are two configuration: use PPPoE protocol
when access Internet through ADSL Modem, input "[email protected]" in the PPPoE User Name field
and "netac123" in the PPPoE Password field, then click "Apply"; use DHCP or Static protocol when
access Internet through optic fiber, when use Static protocol, you need to configure IP address,
gateway, subnet mask and DNS server, click "Apply" button to effect the configuration. Figure 4.8
details the configuration.
Access Internet through ADSL Modem