Netac Tech T610 - Manual (Page 34)

Netac AirTrack T610 Wireless Broadband Router
29
Appendix A: FAQ
1. The power indicator of Netac AirTrack T610 Wireless Broadband Router not bright, why?
Answer: Please check the items as follows:
A. Make sure the power adapter is original-packaged.
B. Make sure your Netac AirTrack T610 Wireless Broadband Router connected to power properly.
C. Make sure your Netac AirTrack T610 Wireless Broadband Router is powered on.
2. The LAN indicator of Netac AirTrack T610 Wireless Broadband Router not bright, why?
Answer: Please check the items as follows:
A. Make sure the computer, hub, switchboard or ADSL Modem/Cable Modem is connected to Netac
AirTrack T610 Wireless Broadband Router properly.
B. Make sure the Network Interface Card installing properly. Please refer to "2.2 Configure TCP/IP" for
details.
3. I cannot log on the configuration page of Netac AirTrack T610 Wireless Broadband Router, why?
Answer: Please refer to "2.3 Check Configuration" for details.
4. Why I cannot access Internet through Netac AirTrack T610 Wireless Broadband Router?
Answer: Please refer to "2.3 Check Configuration" for details.
5. How many IP addresses Netac AirTrack T610 Wireless Broadband Router can support?
Answer: Can support at most 253 IP address, range: 192.168.1.2 192.168.1.254.
6. When shall I use DMZ?
Answer: When Internet users need unlimited communication with LAN host, it need use DMZ. Such as: play
network game or hold Net meeting.
7. My question is not included in "FAQ", what shall I do?
Answer: Please E-mail to [email protected], Netac customer service engineer will reply you in time.