Netac Tech T610 - Manual (Page 3)

Radio Frequency Interference Remarks
This equipment has passed the test, and affirmed that it compatible to constrain B type digital
equipment in section 15 of FCC. This constraint is mainly used to protect the home-keeping
equipment, avoid to be interfered banefully. This equipment can produce, use, and radiate radio
frequency energy. If you don't install and use according to the descriptive manual, the equipment may
interfere the wireless communication banefully.
If this equipment interfere the wireless communication and TV receiving device banefully (can tested
by turning on/off the equipment's power), users can try to correct interference referring to the following
method:
1 Adjust or resettle receive antenna.
2 Enlarge the distance between equipment and receiver.
3 Connect the equipment to the outlet different to the receiver.
4 Consult dealer or experienced wireless/TV technology engineer.
The radiant output power is lower than the exposed constraint of FCC wireless radio frequency brings.
Nevertheless, it should notice that reduce the latent radiance to human body when you use equipment.
Please keep more than 20cm space between equipment and human body when you use and install it.
Under some cases or environments, the use of this equipment may be bounded, if there is no clear
designation to allow to use Wireless Local Area Internet equipment, please ask whether it can be used
or not. Such as:
1 On the airplane.
2 The environment easy to burn and burst.
3 At some particular situation (such as airport, hospital, chemical/petrol/gas industrial place,
private house, and so on).