Nexgrill 720-0600 - Manual (Page 27)

27
Searing Burner Conversion
Steps：
1. Remove thermocouple cover by unscrewing 2 screws that attach the cover to back wall
of firebox. Remove thermocouple placement bracket to release thermocouple. Place
thermocouple to the side.
2. Remove 1 screw that holds igniter prolong in place. Then remove 2 screws that hold
Bracket which holds front of searing burner in place.
3. Remove sear burner by unscrewing 2 screws one on right back corner and one on left back
corner. Then remove burner.
4. With adjustable Nut Driver, remove and replace searing burner orifices.
5. Reverse steps to reassemble.
GAS CONVERSION
continued