National Instruments Instrument Driver NI-DMM - Manual (Page 2)

2 ni.com
Initialize and Close (continued)
ICON TYPE PARAMETER VALUE TO SET, COMMENTS
ViSession vi Session handle
Configure
ICON TYPE PARAMETER VALUE TO SET, COMMENTS
ViSession vi Session handle
ViInt32 Function DC volts, AC volts, and so on
ViReal64 Range
ViReal64 Resolution in Digits
ViSession vi Session handle
ViInt32 Trigger Count Default = 1
ViInt32 Sample Count Default = 1
ViInt32 Sample Trigger Immediate, External, TTL0, and so on
ViReal64 Sample Interval Default = Auto
ViSession vi Session handle
ViInt32 Function Voltage Waveform, Current Waveform
ViReal64 Range
ViReal64 Rate
ViInt32 WaveformPoints
Measurement Options
ICON TYPE PARAMETER VALUE TO SET, COMMENTS
ViSession vi Session handle
ViReal64 Powerline Default = 60 Hz
Frequency
niDMM Configure Powerline Frequency
(niDMM_ConfigurePowerLineFrequency)
Specifies the powerline frequency.
niDMM Configure Waveform Acquisition
(niDMM_ConfigureWaveformAcquisition)
Configures the NI 4070/4071/4072 for waveform acquisitions.
niDMM Configure Multi Point
(niDMM_ConfigureMultiPoint)
Configures the properties for multipoint measurements.
niDMM Configure Measurement Digits
(niDMM_ConfigureMeasurementDigits)
Configures the common properties of the measurement.
niDMM Close
(niDMM_close)
Closes the current session to the instrument.
NI-DMM Instrument Driver Quick Reference
322614f.qxp 11/23/2004 10:13 AM Page 2