Access management, Acl setting, Filtering – NordicTrack N150 User Manual
Page 34
ADSL2+ Wireless N150 Modem Router User Guide
YML14WN
34
www.netcomm.com.au
Access Management
ACL Setting
Go to Access Management -> ACL to enable remote management. The user may remotely access the ADSL2+ Wireless N150 Modem
Router once setting their IP as a Secure IP Address through selected applications. With the default IP 0.0.0.0, any client would be allowed
to remotely access the ADSL2+ Wireless N150 Modem Router.
Filtering
IP Filtering
Go to Access Management -> IP Filtering to block some packets from the WAN. The router provides extensive firewall protection by
restricting connection parameters to limit the risk of intrusion and defence against a wide array of common hacker attacks. The user can
set different IP filter rules of a given protocol (TCP, UDP or ICMP) and a specific direction (incoming, outgoing, or both) to filter the packets.