NetComm G.SHDSL 4-port Security Modem Routers NB712 - Manual (Page 103)

NB712 / NB714 User Guide 103
YML829 Rev1
14.16.10 NAT
You can configure NAT parameters in nat menu.
>> virtual Virtual IP address pool
global Global IP address pool
fixed Fixed IP address mapping
The virtual menu contains range of virtual IP address, delete virtual IP address and show virtual IP address.
>> range Edit virtual IP address pool
delete Delete virtual IP address pool
list Show virtual IP address pool
You can create up to five virtual IP address pool ranges in range command.
----------------------------------------------------------------------
Command: setup ip_share nat virtual range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT local address range entry number <1~5>: 1
Base address: 192.168.1.2
Number of address: 49
----------------------------------------------------------------------
You can delete virtual IP address range - from 1 to 5 - by using delete command.
You can view the virtual IP address range via list command.
To setup global IP address pool, move the cursor “>>” to global command and press enter.
>> range Edit global IP address pool
interface Bind address pool to specific interface
delete Delete global IP address pool
list Show global IP address pool
You can create five global IP address pool range via range command.
----------------------------------------------------------------------
Command: setup ip_share nat global range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT global IP address range entry number <1~5>: 1
Base address: 122.22.22.2
Number of address: 3
----------------------------------------------------------------------
After configuring the global IP address range, you can bind the address pool to a specific interface via bind
command.
----------------------------------------------------------------------
Command: setup ip_share nat global interface <1~5> <1~8>
Message: Please input the following information.
NAT global address range entry number <1~5>: 1
Active interface number <1~8>: 1
----------------------------------------------------------------------
You can delete global IP address range- from 1 to 5- by using delete command.
You can view the global IP address range via list command.