NetComm G.SHDSL 4-port Security Modem Routers NB712 - Manual (Page 44)

44 NB712 / NB714 User Guide
YML829 Rev1
RIP Version: It determines the format and broadcasting method of any
RIP transmissions by the gateway.
RIP v1: it only sends RIP v1 messages only.
RIP v2: it send RIP v2 messages in multicast and broadcast
format.
Authentication required: None: for RIP, there is no need of authentication code.
Password: the RIP is protected by password, authentication
code.
MD5: The RIP will be decoded by MD5 rather than be
protected by password, authentication code.
Poison Reverse: Poison Reverse promptly broadcasts or multicasts the RIP
while the route is changed. (e.g. shutting down one of the
routers in routing table)
Enable: the gateway will actively broadcast or multicast the
information.
Disable: the gateway will not broadcast or multicast the
information.
After modifying the RIP parameters, press finish.
The screen will display the modified parameters. Check the parameters and press Restart to restart the router or
press Continue to setup other parameters.