Nikon Coolpix S30 - Manual (Page 43)

17
The
Basic
s of
Shootin
g
and Playbac
k
C
Changing the Language Setting and the Date and Time Setting
• You can change the Language ( E46) and Date and time (E42) settings in the l setup menu
( A 80).
• You can enable and disable daylight saving time by selecting Date and time ( E42) in the l
setup menu. When enabled, the clock moves forward one hour; when disabled, the clock moves
back one hour.
• If you exit without setting the date and time, O will flash when the shooting screen is displayed. If
still images are taken without setting the date and time, the shooting date and time are not
displayed during playback. Use the Date and time setting in the setup menu to set the date and
time (
A 80, E42).
C
The Clock Battery
• The camera’s clock is powered by a backup battery that is separate from the camera’s main
battery.
• The backup battery charges when the main battery is inserted into the camera, and can provide
several days of backup power after about ten hours of charging.
• If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed
when the camera is turned on. Set the date and time again.
➝ Step 3 of “Preparation 3 Set the
Display Language, Date, and Time” ( A 15)
C
Imprinting the Shooting Date in Printed Images
• Set the date and time before shooting.
• You can permanently imprint the shooting date in images as they are captured by setting Print
date ( E43) in the setup menu (A 80).
• If you want the shooting date to be printed without using the Print date setting, print using the
ViewNX 2 software ( A 66).