NetComm N150 - Manual (Page 26)

NetComm Liberty Series 3G Wireless N150 Wireless Router YmL1�WN YmL1�WN 1�WN
6 www.netcomm.com.au
Wireless Settings
Basic
This page allows you to define the basic wireless settings for this device such as the SSID and channel.
Name Description
Radio On/Off: on by default. Changing this option to off will turn off the wireless feature on the unit and
you will not be able to connect to your 3G Router wirelessly.
Network Mode: You can select which wireless standards are able to connect to your wireless network:
11b/g mixed mode: Both 802.11b and 802.11g wireless devices are in your network.
11b only: Select this if all of your wireless clients are 80.11b.
11g only: Select this if all of your wireless clients are 80.11g.
11n only: Select this if all of your wireless clients are 80.11n.
11/b/g/n mixed mode: Select this if 802.11b and 802.11g and 802.11n wireless devices are in your network.
Network Name (SSID): The SSID (Service Set Identifier) is the name of your wireless network. Use a unique name
to identify your wireless network so that you can easily connect from your wireless clients.
This field is case sensitive and can be up to 32 characters. You should change the default
SSID for added security.
Frequency (Channel): This setting configures the frequency that the Wireless Radio uses for wireless
connectivity. Select one channel that you wish to use from the drop down list.
Click Apply to save the settings.