Netcomm liberty series - wireless n150 router – NetComm N150 User Manual

Page 29

Advertising
background image

YmL1�WN

NetComm Liberty Series 3G Wireless N150 Router

1�WN

NetComm Liberty Series 3G Wireless N150 Router

NetComm Liberty Series 3G Wireless N150 Router

3G Wireless N150 Router

www.netcomm.com.au

9

NetComm Liberty Series - Wireless N150 Router

Name

Description

WPA/WPA2:

WPA (Wi-F

i

Protected Access) authentication is suitable for enterprises. It must be used in

conjunction with an authentication server such as RADIUS to provide centralized access

control and management. It can provide stronger encryption and authentication solution

than non WPA modes.

Name

Description

WPA-PSK/WPA2-
PSK:

A newer type of security is WPA-PSK (TKIP) and WPA2-PSK (AES). This type of security

gives a more secure network when compared to WEP. Use TKIP Encryption Type for WPA-

PSK and AES for WPA2-PSK. After that, please enter the key in the Passphrase field. The

key needs to be more than 8 characters and less than 63 characters and it can be any

combination of letters and numbers. Please note that the configuration for WPA-PSK and

WPA-PSK is identical.

Name

Description

802.1x:

In order to use 802.1X security, you need to have a RADIUS server on your network that will act as the

authentication server. Please type in the details for your RADIUS server in the fields required.

Note: After configuring wireless security, you also need to configure your wireless adapter to use the same security settings before you can connect wirelessly. Not all wireless

adapters support WPA-PSK/WPA2-PSK/WPA/WPA2 security; please refer to your wireless adapter user guide for more details. It is strongly recommended to set up a simple
wireless security such as WEP 64bit or WPA (when the wireless client supports WPA) in order to secure your network.

Advertising