New Holland T9010 - Manual (Page 14)

Megaflow ™ system delivers up to 356Lpm through two separate hydraulic
circuits – Giving more than enough hydraulic capacity for big jobs.
Huge flow capacity … maximum
efficiency … instantaneous response … and
plenty of flexibility to handle numerous
functions at the same time without hindering
performance. There’s nothing like T9000
hydraulics for operating high-demand
implements with ease.
The T9000’s efficient closed-center load
sensing (CCLS) system delivers the correct
flow and pressure where you need it and
precisely when it’s needed. The system
operates at peak efficiency at all times and
goes into low-pressure standby when
hydraulic power isn’t needed, to save power
and fuel.
A 151 lpm pump is standard on T9010 to
operate steering, three-point hitch, trailer
brakes and auxiliary systems.
A larger 208 lpm pump is optional (215 lpm
on the T9060). But, for really big jobs with
huge-capacity hydraulic demands, choose
the MegaFlow™ system option.
MegaFlow™ is the capacity leader
The MegaFlow system uses a
second, independent 132 lpm pump, in
addition to the 208 lpm larger
primary pump. On the T9060, the
second pump is in addition to the 215 lgpm
primary pump, for a market-leading 356 lpm
flow capacity. Combined, these pumps
provide two separate circuits, so you can
simultaneously operate a low-flow, high-
pressure system from one remote, and a
high-flow, low-pressure system from
another. With MegaFlow hydraulics, you can
easily operate high-demand implements such
as air seeders, planters and beet lifters with
complete confidence.
Hydraulic control levers and couplers are color-coded for ease
of hook-up and to help track hydraulic operations.
14
High-flow hydraulics for
high-demand implements