New Holland T9010 - Manual (Page 5)

The New Holland 252 antenna receives the GPS
signals to guide the vehicle. This antenna can easily be
transferred from tractor to tractor or even to your combine.
The RTK base station includes a GPS antenna,
receiver and radio link to provide RTK correction
signals to tractor-mounted auto-guidance systems
and can be either portable or permanently mounted.
The New Holland VT™ colour monitor provides complete
interface with the IntelliSteer™ system.
The Navigation Controller II receives user, satellite,
correction and steering inputs and provides the control to
guide the tractor. It includes three gyrometers and
accelerometers for operation in uneven terrain.
5
Put IntelliSteer™ in your tool box
New Holland offers four versions of the
IntelliSteer system with varying levels of
accuracy to match your needs:
• IntelliSteer RTK (Real Time
Kinematics) delivers the highest
accuracy, in the +/- 1 to 2 cm
1 ( inch) range.
• IntelliSteer DGPS HP (Differential GPS
High Performance) offers a
higher level of accuracy in the
+/- 5 to 10 cm (2 to 4 inch) range.
• IntelliSteer DGPS XP (Differential
GPS) provides typical accuracy in
the +/- 8 to 13 cm (3 to 5 inch) range.
• IntelliSteer DGPS VBS (Differential
GPS) provides typical accuracy in the
+ / - 15 to 30cm (6 to 12 inch) range.
Immediate operator override
The electronic steering valve and manifold
are plumbed into the tractor steering system
and receive steering direction from the
IntelliSteer system’s navigation controller
mounted inside the cab. Slightly turning the
steering wheel returns complete tractor
steering control to the operator.