Nortec NHTC User Manual
Page 76
10-20
Page 68
2008-10-01
e
Channel 2 Set point – Control channel 2 setpoint for relative humidity in
space 0-100% (read/write).
f
System Demand – Indicates humidifier system demand based on input
signal calculations 0-100% (read).
g
Demand/rh_Configuration Parameter – Configures humidifier to accept
demand or %rh signal(s) (read/write).
h
Remote fault Indication – System fault indication and alarm status (read).
i
Network Sensors – Allows network-enabled sensing or control (read/write).
j
Remote Disable – Provides remote humidifier enable/disable system
control. (read/write).
k
Remote Service Indication – Provides remote humidifier service
indication (read).
l
Remote Status Indication – Provides remote humidifier on/standby
system status indication (read).
(3) Remote Monitoring And Control Options (NHTC and NHTC OUTDOOR only)
Reference: Section 15900 - Building Controls and Automation
(a) NORTEC OnLine web based monitoring and control from any location with Internet
access, using standard Internet Explorer, version 6.0 or newer.
(b) NORTEC OnLine remote monitoring hardware using secure <DHCP Ethernet
Connection> or <Static IP Ethernet Connection> or <Dial-up Internet Connection>
or <GPRS wireless Internet Connection> Internet communication protocols.
(c) NORTEC OnLine Monitoring Service (NOMeS) with weekly humidifier examination
by factory direct technicians for first year, renewable/extendable up three
consecutive years.
(d) One additional year (third year), extended humidifier warranty when renewed/
extended for third year of NORTEC OnLine Monitoring Service (NOMeS).
(e) Packaged accessory, factory installed and ready for customer supplied <Ethernet>
or <Modem> communication connection.
(f)
Package will include the listed items in either paragraph (f) 1 through 17 or
paragraph (g) 1 through 7:
1
Internet accessible graphical representation of humidifier performance.
2
Remotely enable/disable humidifier.
3
Remotely adjust rh% set point(s), if equipped.
4
Remotely adjust ‘limited capacity’.
5
Automated e-mail advisories for scheduled service or abnormal conditions.
6
Up to three customer e-mail addresses available for automated e-mail
advisories.
7
Up to 50 incidents, of factory direct support and follow-up per humidifier.
8
First year of remote access includes factory direct monitoring.
9
Weekly checks by NORTEC OnLine factory technicians.
10 Remote factory diagnostics and programming capability.