Nortel Networks WAG54G - Manual (Page 35)

28 Chapter 5: Configuring the Wireless-G ADSL Gateway
The Wireless Tab
Wireless-G ADSL Gateway
You can also input the key or keys manually, by typing in the key input boxes. 64-bit keys must be made up of
exactly 10 hex digits, while a 128-bit key must be made up of exactly 26 hex digits.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. For detailed instructions on configuring wireless security for
the Gateway, turn to “Appendix B: Wireless Security.”
The Wireless Access Tab
Wireless Network Access
Wireless Network Access. Select Allow All you want all computers to have access to the wireless network. To
restrict access to the network, select Restrict Access, and then select Prevent to block access for the
designated computers or Permit only to permit access for the designated computers. Click the Edit MAC
Address Access List button, and the Mac Address Filter List screen will appear.
Enter the MAC addresses of the computers you want to designate. To see a list of MAC addresses for wireless
computers or clients, click the Wireless Client MAC List button.
The Wireless Client MAC List screen will list computers, their IP addresses, and their MAC addresses. Click the
Refresh button to get the most up-to-date information. To add a specific computer to the Mac Address Filter List,
click the Enable MAC Filter checkbox and then the Update Filter List button. Click the Close button to return to
the Wireless Client MAC List screen.
On the Wireless Client MAC List screen, click the Save Settings button to save this list, or click the Cancel
Changes button to remove your entries.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Figure 5-22: MAC Address Filter List
Figure 5-21: Wireless Network Access
Figure 5-23: Wireless Client MAC List