Niles Audio ZR-4630s - Manual (Page 69)

61
Step 1 - Press and hold the PROGRAM button
for two seconds.
Three LEDs illuminate: ENTER IR,
PROGRAM, and SOURCE 2. The POWER OR DISCRETE
“ON” LED blinks.
Step 2 - If Source Two is turned ON/OFF
with IR commands, go directly to Step 3.
If Source Two is not turned ON/OFF via
IR Commands, press the NEXT button
twice and move ahead to Step 8.
Two LEDs illuminate:
PROGRAM and SOURCE 2. The IR COMMANDS LED blinks.
Step 3 - Teach the POWER OR DISCRETE “ON”
IR command from Source Two’s factory remote
control into the IR Sensor Window.
Three LEDs are illuminated:
ENTER IR, PROGRAM, and SOURCE 2.
The POWER OR DISCRETE
“ON” LED blinks.
The ENTER IR LED blinks once after the IR command
is received and remains illuminated.
SYSTEM PROGRAMMING STEPS
PROGRAMMING THE SOURCE COMPONENTS