Niles Audio ZR-4630s - Manual (Page 70)

62
Step 4 - You can test the IR command by pressing the TEST IR button. The source will operate if the command has
been taught correctly. If it does not, reteach the IR command until the source operates.
Repositioning the remote control while reteaching can help to capture the command accurately.
Pressing the TEST IR button issues the last IR command taught.
Step 5 - Press the NEXT button once.
Three LEDs are illuminated:
ENTER IR, PROGRAM, and SOURCE 2. The DISCRETE OFF
LED blinks.
Step 6 - If provided, teach the DISCRETE “OFF” IR com-
mand from Source Two’s factory remote control and test
it as described in Step 4. If Source Two does not have a
DISCRETE “OFF” IR command, go directly to Step 7.
Three LEDs are illuminated:
ENTER IR, PROGRAM, and SOURCE 2.
The DISCRETE OFF LED blinks.
The ENTER IR LED blinks once after the IR command
is received and remains illuminated.
SYSTEM PROGRAMMING STEPS