Reconnecting to the local loop, Procedure – Nortel Networks Nortel Backbone Link Node Router 5030 User Manual

Page 7

Advertising
background image

7

Reconnecting to the Local Loop

"

Procedure

1. Feed new jumper wiring through the POTS splitter rubber grommet. Remove the

insulation at the end of the wiring.

2. On the left side labeled LINE, attach red to terminal screw P1 and green to terminal

screw P2. Tighten both terminal screws with a flat-blade screwdriver.

97-15257-01

P1

P2

P3

P4

LINE

PHONE

Red

Red

Green

Green

New Wiring from

Punchdown

Block or NID

To
Telephone

POTS Splitter

Advertising