Nortel Networks NN43011-110 - Manual (Page 9)

9
About this document
Descriptions and procedures pertaining to IP applications in this document
are provided for continuity for customers remaining on Communication
Server Release 4.5.
This document is a global document. Contact your system supplier or your
Nortel representative to verify that the hardware and software described
are supported in your area.
A stand-alone IP Trunk (ITG Trunk) configuration is the only IP application
supported on the Meridian 1 Option 11C platform in Communication Server
1000 Release 5.0. For information on software-only upgrades, refer to
Meridian 1 Small System Software Upgrade (NN43011-459).
Systems described within this document that are configured with IP Phones
or Signaling Servers using Communication Server 1000 Release 4.5 and
want to upgrade to Communication Server 1000 Release 5.0 must be
upgraded to Communication Server 1000E with a Common Processor
Pentium Mobile (CP PM) call processor. For migrations to Communication
Server Release 5.0, refer to:
• Communication Server 1000E Upgrade - Option 11C Cabinet to CS
1000E (NN43041-464)
• Communication Server 1000E Upgrade - Option 11C Chassis to CS
1000E (NN43041-465)
• Communication Server 1000E Upgrade - CS 1000M Cabinet to CS
1000E (NN43041-466)
• Communication Server 1000E Upgrade - CS 1000M Chassis to CS
1000E (NN43041-467)
Subject
This document provides an overview of the general design and features of
Small Systems.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Overview
NN43011-110 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2003 - 2007, Nortel Networks
.