NEC EXPRESS5800 N8800-099F - Manual (Page 91)

Windows Setup 4-39
7. Click [Change] in the [Virtual memory] box.
8. Change the value set for [Initial Size] in the [Paging file size for selected drive] box to the
[Recommended] value or more, and then click [Set].
IMPORTANT:
„ Be sure to create the file in the size more than [Recommended] value in the OS
partition. If a value smaller than the [Recommended] value is set for [Initial Size] of
the paging file, accurate debug information (memory dump) may not be collected.
„ For the [Recommended] value, see "Size of the Partition to be Created" (page 4-5).
„ To be prepared for failure, it is recommended to press the dump button to see if the
memory dump can be collected in normally beforehand.
„ If the memory has been expanded, re-set the paging file according to the memory
size.