Network Technologies SM-nXm-C5AV-LCD - Manual (Page 5)

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5
1
INTRODUCTION
The SM-nXm-C5AV-LCD (VEEMUX) is an Audio/Video Matrix switch via CAT5 designed to work in conjunction with the
NTI ST-C5VA-600 or ST-C5SVA-600 CAT5 Audio/Video Extender (XTENDEX). Up to 32 audio/video sources can be connected
to the VEEMUX via XTENDEX Local Units (n), each accessible by up to 16 audio/video displays connected via XTENDEX
Remote Units (m).
The VEEMUX enables connections from any single XTENDEX Local Unit to any or all of the connected XTENDEX
Remote Units, creating a matrix of possible CAT5 audio/video connections. Audio/video displays can be located up to 600 feet
away from the connected source.
The available models are:
SM-8X8-C5AV-LCD SM-16X8-C5AV-LCD SM-32X8-C5AV-LCD
SM-8X16-C5AV-LCD SM-16X16-C5AV-LCD SM-32X16-C5AV-LCD
Features
•
Up to 16 audio/video displays may be connected to up to 32 audio/video sources (via ST-C5VA-600 Extenders)
•
Multiple methods of user setup and control:
ƒ Front Panel Interface with LCD and keypad
ƒ Web Interface with multiple pages with secure socket layer (SSL) encryption to provide secure access between the client
browser and central server. Supports SSLV3/TLSV1 protocol.
ƒ Telnet Interface
ƒ RS232 Interface
ƒ Multi-user support- up to 16 users (including the administrator) can have controlled Ethernet access to the VEEMUX
•
Digital VU-Meter that displays the stereo audio levels for the currently selected port (displayed by LCD).
•
Automatic video quality adjustment, with additional manual control, assures maximum video quality at lengths of up to 600
feet.
•
All connections between local sources and remote displays can be made using CAT5, CAT5e, or CAT6 UTP cable.
•
Ethernet connection speed is 10/100baseT
•
A monitor can only be connected to one audio/video source at a time.
.
Supported Web Browsers:
Most modern web browsers should be supported. The following browsers have been tested:
•
Microsoft Internet Explorer 6.0 or higher
•
Netscape 7.0 or higher
•
Mozilla FireFox 0.9.2 or higher
Set your browser to always check if there is a newer version of the page than the version stored in cache. This action will ensure
that it will display the most up-to-date information.
Materials
Materials Supplied with this kit:
•
NTI SM-nXm- C5AV LCD Audio/Video Matrix switch via CAT5
•
IEC Line cord, country specific
•
4-#10-32 x 3/4" pan head screws and 10-32 cagenuts (server cabinet mounting hardware)
•
CD with: a pdf file of this owner's manual
the NTI Discovery Tool
the Matrix Switcher's Control Program
Materials Not Supplied, but REQUIRED :
¾ XTENDEX Local and Remote Units with either CAT5 Unshielded Twisted Pair (UTP) cable, CAT5e cable, or CAT6 cable.
Cable(s) must be terminated with appropriate RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg. 32 for proper
EIA/TIA 568 B wiring method)
¾ A serial cable with DB9 connectors on each end wired straight through (pin 1 to pin 1, pin 2 to pin 2, etc.) will be required for
RS232 connection to a remote terminal. See page 32 for cable pinouts.
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or (330)-562-7070 or visit
our website at www.networktechinc.com.