Nortel Networks Nortel M 7000 - Manual (Page 10)

Page 10
Privacy FEATURE 83
Change the privacy setting for an external line. If a line normally has
privacy, this permits another telephone that shares the line to join your call
by selecting the line while you are using it. If a line normally has privacy
disabled, this prevents another telephone that shares the line from joining
your call by selecting the line while you are using it. The privacy setting is
re-established once you end your call or when you enter the Privacy
feature code again.
Ring again FEATURE 2 Cancel: FEATURE #2
Monitor a busy or unanswered telephone, or a busy line pool within your
system. Ring Again signals you to call back when the telephone or line
pool becomes available.
Ring type FEATURE *6
Select a distinctive ring to help differentiate between your telephone and
others nearby.
1. Press
FEATURE *6.
2. Enter the ring type number (1 to 4).
3. Press
HOLD .
Ring volume FEATURE *80
Make your telephone ring so that you can adjust the volume. You can also
adjust the volume any time your telephone rings.
Run/stop FEATURE *9
Store more than one autodial number or external carrier feature code on
one memory button by inserting a break point between numbers or codes.
The first press of the button dials the first number or code; the next press
dials the next number or code. You can program up to four numbers or
codes separated by break points.
Saved number
redial FEATURE 67
Save a number to redial later. Enter the code while you are on a call that
you have dialed to save the number. Enter the code when you are not on a
call to redial the saved number.
Service
schedules FEATURE 870
Display the modes that have been turned on at a designated control set.
Telephone features