Nortel Networks Nortel M 7000 - Manual (Page 16)

Page 16
Hot desking -
activating To activate hot desking:
On the telephone to which you are diverting your calls (yyy).
1. Enter Hot desking:
2. Press
Divert .
3. At the DN prompt, enter the DN of your telephone (xxx).
4. Press
OK . The display reads Enter < > PW .
5. Enter the password for your telephone (xxx).
6. Press
OK .
Hot desking -
cancelling
De-activating hot desking
Hot desking can be cancelled from either IP telephone:
Ensure that the telephone is on-hook before cancelling hot desking. There
may be up to a 10-second delay after the call ends before the system will
allow you to cancel hot desking. This period can vary, depending on the call
type.
On the active telephone (yyy):
1. Enter the Hot desking feature. The display reads:
Cancel hot desking?
2. Press Yes to cancel hot desking. The telephone displays of both sets
return to normal.
To cancel hot desking on the diverted telephone (xxx), press CANCEL .
Automatic cancellation occurs if the UTPS service from the system is
terminated or if either telephone re-boots, or is unplugged, or is hot-desked
by a third telephone.
Hot desking -
reset
password
If you forget your hot desking password, ask your system administrator to
reset the password for your telephone. This will allow you to access hot
desking on your telephone and enter a new password.
Time zone -
adjust Use this feature to reset the time on an IP telephone that is located in a
different time zone from the Business Communications Manager to which it
is registered.
FEATURE *510.
IP telephone features for 20XX telephones