Nortel Networks Nortel M 7000 - Manual (Page 14)

Page 14
Call log -
return call
To return a call from your Call Log:
1. Display the desired number on your telephone.
2. Edit the number, if required. You can add numbers for long distance dialing
or line pool access or remove numbers using the volume bar.
3. Press a line button.
4. Lift the handset.
Call log -
options FEATURE *84
Select the type of calls that will automatically be stored in your Call Log.
Press # to see the next setting. Press
HOLD to select the displayed setting.
Call log -
password FEATURE *85
Program a four-digit password for your Call Log. To remove a forgotten
password, see your System Administrator.
Logit FEATURE 813
Store caller information for your current call in your Call Log.
ETSI feature
MCID
(ETSI feature)
FEATURE 897 must be entered 30 seconds after the caller hangs up, and
before you hang up
Record caller information for last external call at the central office that
assigned the line. This feature only works if the incoming calls were received
over ETSI ISDN lines, and the feature is activated in programming. Check
with your system administrator.
Call Display Services