Tools>system commands – NetComm NB1 User Manual
Page 60
Advertising
NB1 User Guide
YML780 Rev1
60
www.netcomm.com.au
Tools>System Commands
System commands allow you to carry out basic system actions. Press the button to
execute a command. Here you will find the following functions:
•
Save
All
•
Restart
•
Restore Defaults (same as pressing and holding the button on the back to clear
and reset to factory default.
Note: If you Restore Defaults you will need to reconfigure your internet connec-
tion settings, ISP Username & Password etc.
Advertising