NordicTrack Incline Trainer 9800 - Manual (Page 19)

18
indicators in the CURRENT SEGMENT column
are lit, the speed settings in the matrix will not
move downward as described above. Important:
When the next segment of the program begins,
the INCLINE TRAINER will automatically adjust
to the speed and incline settings for the next
segment.
To stop the program, press the STOP button. The
time will begin to flash in the main display. To
restart the program, press the START button or the
SPEED + button. The walking belt will begin to
move at 1 mph. When the next segment of the pro-
gram begins, the INCLINE TRAINER will automati-
cally adjust to the speed and incline settings for the
next segment.
Follow your progress with the main display.
Refer to step 5 on page 15.
Measure your heart rate if desired.
Refer to step 6 on page 16.
When the program is completed, remove the
key.
Step onto the foot rails. Remove the key from the
console and put the key in a secure place.
When the INCLINE TRAINER is not in use, switch
the on/off circuit breaker near the power cord to
the off position and unplug the power cord.
6
5
4