NEC DSX 1093099 - Manual (Page 106)

Line Group Routing
98 ◆ Features DSX Feature Handbook
Line Group Routing
Description
With Line Group Routing enabled, an extension user can just press INTERCOM and dial 9 to place an out-
side call. Line Group Routing automatically selects the first available line in the extension’s programmed
“dial 9” Line Group. This simplifies placing calls in systems that have a lot of lines for outgoing calls.
Rather than press one of many line keys, the user just dials
9 instead.
Operation
Dial a single code to place a call over the first available line in a Line Group.
Using Line Group Routing
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
• By default, pressing Intercom and dialing 911 or lifting the handset and dialing 911 will not call emergency services.
To place a call using Line Group Routing:
1. Lift the handset and press INTERCOM .
2. Dial 9 .
• If you don’t hear dial tone, Line Group Routing is not enabled.
• If you hear busy tone and your extension has Line Queuing, you can dial
2 to queue for a line to become free.
If you hang up, the system converts the queue to a Line Callback.
3. Dial your outside number.