NEC DSX 1093099 - Manual (Page 160)

Speed Dial
152 ◆ Features DSX Feature Handbook
User Programmable Features
a. Repeat from step 3 to program another bin.
b. Press SPEAKER to exit.
To dial a stored System Speed Dial number:
1. Do one of the following.
a. Press INTERCOM, dial # , then dial the System Speed Dial bin number (normally 201-299).
c. Press a Feature Key set up as a System Speed Dial key.
2. (Optional)
• To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.
• If the programmed route is busy, press an idle line key to reroute the call.
Programming Personal Speed Dial
Feature Mnemonic Operation Access Level
Speed Dial #SP (#77) #SP + Press bin key (for bins 701-710) + HOLD + Enter
outside line (e.g., 1), Line Group (90-98), or INTERCOM
for Intercom feature + HOLD + Number to store + HOLD
twice + Name + HOLD + Press another bin key or
SPEAKER to exit.
1-5
Programming System Speed Dial
Feature Mnemonic Operation Access Level
Speed Dial #SP (#77) #SP + Dial System Speed Dial bin number (e.g., 201) +
HOLD + Enter outside line (e.g., 1), Line Group (e.g., 90),
or INTERCOM for Intercom feature + HOLD + Number
to store + HOLD twice + Name + HOLD + Dial another
bin or SPEAKER to exit.
4-5
Programming and Dialing System Speed Dial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]