Nilfisk-Advance America IVB 5-H - Manual (Page 6)

04
english
IVB 3-H
IVB 5-H
IVB 7-H
Tool socket Use the socket on the vacuum
cleaner for the purpose defined
in the operating instructions
only.
Before plugging an appliance
into the appliance socket:
1. Switch off the vacuum clean-
er
2. Switch off the appliance to
be connected.
CAUTION!
Follow the operating instructions
and safety instructions for appli-
ances connected to the power
tool socket.
Maintenance, cleaning and
repair Only carry out maintenance
work described in the operating
instructions.
Always pull out the mains plug
before cleaning and mainte-
nance of the vacuum cleaner.
During maintenance and clean-
ing, handle the vacuum cleaner
in such a manner that there is
no danger for maintenance staff
or other persons.
In the maintenance area
– use filtered compulsory ven-
tilation
– wear protective clothing
– clean the maintenance area
so that no harmful substanc-
es get into the surroundings.
Before removing the vacuum
cleaner from the area contami-
nated with harmful substances:
– clean the outside of the vac-
uum cleaner, wipe it clean or
pack the vacuum cleaner in
well sealed packaging
– and avoid spreading depos-
ited harmful dust.
During maintenance and repair
work all contaminated parts that
could not be cleaned satisfacto-
rily must be:
– packed in well sealed bags
– disposed of in a manner that
complies with valid regula-
tions for such waste remov-
al.
A dust test must be performed at
least once every year by Nilfisk-
Advance service or a trained
person. This test includes, for
example, whether there is dam-
age to the filter, the vacuum
cleaner is sealed to the air and
the control equipment works
properly.
Accessories and spare parts Use only the brushes supplied
with the vacuum cleaner or
specified in the operating manu-
al. The use of other brushes can
adversely affect safety. Use only original Nilfisk-Ad-
vance accessories and spare
parts (see section 9.5). The use
of other parts can adversely af-
fect safety.