2 front panel leds – NetComm NB3300 User Manual
Page 11
Rev.1 - YML632
www.netcomm.com.au
ADSL Modem Router
Page 11
2-2 Front Panel LEDs
The following figure shows the front view of the NetComm ADSL Modem Router.
The LEDs on the front panel indicate the status of the unit.
Power:
Green
On when power is on.
Diag:
Red
Lights up during system check when the power is initially
connected. If the Router is working properly, the light should
switch off after the diagnostic has been completed.
ADSL port
Link:
Green
Blinking when ADSL line is training.
On when ADSL line is ready.
Activity:
Yellow
Blinking when data is being received/transmitted through ADSL
line.
LAN ports
Link/ACT:
Yellow
On when link is up and operating at 10Mbps.
Green
On when link is up and operating at 100Mbps.
Yellow/ Green Blinking when data is being received/transmitted through the
LAN port.
FD/COL:
Green
On when operating at full duplex mode (10/100M).
Blinking when a collision is occurring on the port.