5 dynamic routing – NetComm NB3300 User Manual

Page 30

Advertising
background image

www.netcomm.com.au

Rev.1 - YML632

Page 30

ADSL Modem Router

Application Name Enter the name of the application you wish to configure in the
Application Name column to identify this setting. This is just a label and does not govern
the function of the settings.

Outgoing Port Range Enter the port number or range of numbers this application uses
when it sends packets outbound. The Outgoing Control port numbers act as the trigger.
When the NetComm ADSL Modem Router detects the outgoing packets with these port
numbers, it will allow the inbound packets with the Incoming Port Numbers that you set in
the next column to pass through the NetComm ADSL Modem Router.

Incoming Control Enter the port number or range of numbers the inbound packets carry.

Click “Apply” after making any changes.

Followings are port numbers list of some popular application:

Application

Outgoing Control

Incoming Data

Battle.net

6112

6112

DialPad

7175

51200, 51201,51210

ICQ

4000

4000

ICU II

2019

2000-2038, 2050-2051, 2069,

2085,3010-3030

IRC

6667

531, 6666, 6667

MSN Gaming Zone

47624

2300-2400, 28800-29000

PC to Phone

12053

12120,12122, 24150-24220

Quick Time4

554

6970-6999

wowcall

8000

4000-4020

4-5 Dynamic Routing

The Dynamic Routing feature allows your NetComm ADSL Modem Router to exchange routing
information with other routers in the network. Enabling this feature is likely to enhance
performance of your NetComm ADSL Modem Router.

TX From the drop-down list, select one of the routing information types, “RIP-1”, “RIP-1
Compatible”
, or “RIP-2”, to enable the “TX” (transmit) function. “RIP-1” is the protocol
used by older routers and newer routers should use “RIP-2”. “RIP-1 Compatible” serves to
broadcast RIP-1 and multicast RIP-2.

RX From the drop-down list, select one of the routing information types, “RIP-1” or “RIP-
2”
, to enable the “RX” (receive) function.

Click “Apply” after making any changes.

Advertising