Power up, Cascading, Limitations – Network Technologies KEEMUX-Px User Manual

Page 9: Nti keemux series ps/2 kvm switch

Advertising
background image

NTI KEEMUX Series PS/2 KVM Switch

5

Power Up

1.

Turn the KEEMUX power ON first. The mode LEDs on the KEEMUX should flash twice.

2.

Turn the monitor power ON.

3.

Turn any or all of the CPUs ON.

FYI: Do not press any port buttons on the front panel until the PORT 1 LED on the front panel illuminates.


CASCADING

The KEEMUX switch can be expanded to access up to 152 CPUs by cascading multiple units together, as illustrated below. The
KEEMUX connected to the monitor and keyboard must be configured as the “master unit" (via dip-switches-see page 6). Any
switches connected to the master unit must be configured as “slave units". All KEEMUXs are fully configurable for this expansion
method. The only additional hardware required is a set of keyboard, monitor, mouse, and RMT extension cables for each slave
unit (see Fig. 5 below).

Figure 5- Cascaded configuration

Limitations

a. All the slave units must be the same size.
b. Only 4, 8, or 16-port switches can be used as slave units.
c.

Up to 8 slave units may be connected to form a maximum system size of 152 ports (1 x 32 port master + 8 x 16 port slaves).

d. Slave units must be added to the master unit in order (slave #1 to master’s port 1, slave #2 to master’s port 2, etc.).


FYI
: Port 1 of the master unit (with a 4-port slave unit connected to it) will function and be controlled as ports 1-4 (1-8 for
an 8-port slave, 1-16 for a 16-port, etc.). Port 2 of the master unit (with a second 4-port slave unit connected) will
function and be controlled as port numbers 5-8 (9-16 for an 8-port slave, 17-32 for a 16-port slave, etc.). See Fig. 6 on
page 6.


e. All units must be powered OFF during configuration and interconnecting.






KEEMUX-P8

(master unit)

VGA

Multi-Scan

Monitor

V

EX

T-

xx

-M

M

(slave unit)

VEXT-xx-MM

(slave unit)

PS/2 CPU
x 1...8

VVKINT-xx-MM

(slave unit)

PS/2 CPU
x 1...8

REXT-SR-xx

REXT-SR-xx

R

EX

T-S

R-

xx

VV

KIN

T-xx

-MM

VE

XT-x

x-M

M

V

EX

T-x

x-M

M

V

VK

IN

T-x

x-M

M

PS/2 CPU

PS/2 CPU

VEXT-xx-MM

VVKINT-xx-MM

VVKINT-xx-MM

VEXT-xx-MM

V

VK

IN

T-

xx

-M

M

VEXT-xx-MM

KEEMUX-P8

VEXT-xx-MM

VVKINT-xx-MM

KEEMUX-P8

VVKINT-xx-MM

KEEMUX-P8

PS/2 CPU
x 1...8

Advertising
This manual is related to the following products: