NISSAN 2008 Altima Sedan - Manual (Page 121)

ᮀ
3 Condition for calculating a route to the des-
tination:
Allows you to change the conditions for cal-
culating a route to the destination.
“CHANGING ROUTE CALCU-
LATION CONDITIONS”
(page 5-17)
ᮀ
4 Condition for calculating a route to a way-
point:
Allows you to change the conditions for cal-
culating a route to a waypoint.
“CHANGING ROUTE CALCU-
LATION CONDITIONS”
(page 5-17)
ᮀ
5 Allows you to add a destination.
“SETTING A DESTINATION OR
WAYPOINT” (page 5-15)
ᮀ
6 Allows you to add a waypoint.
“SETTING A DESTINATION OR
WAYPOINT” (page 5-15)
Setting a destination or waypoint
You can add a destination or waypoint to the
route already set.
A total of 6 destinations or waypoints can be set.
1. Touch the “Destination” key or “Waypoint”
key.
INFO:
If you touch the “Destination” key, the current
destination changes to a waypoint.
2. Set a destination or waypoint. The method
of searching for a destination or waypoint is
the same as the one for a destination.
“4. Setting a destination”
LNV0271 LNV0272
Route guidance 5-15
੬
REVIEW COPY— 2008 Altima (alt)
Navigation System OM—USA_English (nna)
03/13/07—arosenma
੭