NISSAN 2008 Altima Sedan - Manual (Page 191)

VOICE COMMAND EXAMPLES
To use the voice recognition function, saying one
command is sometimes sufficient, but at other
times it is necessary to say two or more
commands. As examples, some additional basic
operations by voice commands are described
here.
Example 1: Switching the map to the
Birdview™ mode
1. Press the button located on the
steering wheel switches.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon
on the screen changes from gray to orange,
say “Birdview”.
4. Voice feedback will be provided when the
command is accepted, and the map is dis-
played in Birdview™.
Example 2: Setting a destination using
a nearby place
1. Press the button located on the
steering wheel switch.
2. The system announces, “Please say a
command”.
3. After the tone sounds and the icon
on the screen changes from gray to orange,
say “Destination nearby places”.
LNV0419 LNV0407
Voice recognition 9-5
੬
REVIEW COPY— 2008 Altima (alt)
Navigation System OM—USA_English (nna)
03/06/07—arosenma
੭