NISSAN 2008 Altima Sedan - Manual (Page 85)

When you are setting the destination to a facility,
the following methods are available.
● Setting a Point of Interest
This allows you to find a facility by type, and
then have the system calculate a route to that
destination. Specify the region and city of the
destination to find it more quickly.
● Setting a Freeway Entrance/Exit
This allows you to set the destination to an en-
trance or exit of a freeway, and then have the
system calculate a route.
● Setting by Phone Number
If you know the telephone number of the
facility, use this to find the facility by entering
the number, and then have the system calcu-
late a route.
● Setting a Nearby Place
This allows you to set the destination to a fa-
cility located near the current vehicle location
or another location that you move to by scroll-
ing the map, and then have the system calcu-
late a route. If there is a particular Point of In-
terest type that you intend to use frequently,
you can store it in the list of nearby Points of
Interest.
“CUSTOMIZING NEARBY PLACES”
(page 6-26)
SETTING A POINT OF INTEREST
1. Press the DEST button.
2. Touch the “Points of Interest” key.
3. Touch one of the main category keys.
INFO:
Touch the “By Name” key to include all catego-
ries in the route calculation conditions.
LNV0203 LNV0204
SETTING A FACILITY AS THE DESTI-
NATION
Setting a destination 4-21
੬
REVIEW COPY— 2008 Altima (alt)
Navigation System OM—USA_English (nna)
03/13/07—arosenma
੭