Eizo 620L - Manual (Page 39)

Date / Time
NOTE
• Date and time will return to the default settings if the power cord is unplugged.
[Date/Time] ........................Set date, current time, or time zone.
[NTP Server] .......................Synchronize time with the NTP Server.
Select when to synchronize time with the NTP server
(on every boot up or every time clicking the
[Synchronize] button.)
NOTE
• Synchronizing time at startup is effective when the 620L is connecting
WTS/Web Server using a network connector on the rear.
• Getting the NTP Server information from the DHCP Server needs to satisfy the
following:
* Connect the WTS/Web Server by the network connector on the rear
* Use the DHCP Server to get information such as IP address
* Set the NTP Server option at the DHCP Server.
6. USING THE TERMINAL PROPERTIES
39